Titanium Grade 2 Supplier India – UNS R50400 Commercially Pure Titanium
SEO Title: Titanium Grade 2 Supplier India – UNS R50400 Titanium
Primary Focus Keyword: Titanium Grade 2 Supplier India
Secondary Keywords: Titanium Grade 2 material, UNS R50400 titanium, commercially pure titanium Grade 2, Titanium Grade 2 round bar, Titanium Grade 2 plate, Titanium Grade 2 industrial applications, Titanium Grade 2 material supplier Mumbai
URL Slug: titanium-grade-2-supplier-india
Meta Description: Looking for a Titanium Grade 2 supplier in India? Explore UNS R50400 titanium, its properties, applications and purchasing requirements. Enquire with Manan Steel & Metals.
Table of Contents
- What Is Titanium Grade 2?
- Titanium Grade 2 Material Identification
- Key Properties of Titanium Grade 2
- Industrial Applications of Titanium Grade 2
- Titanium Grade 2 Product Forms
- Important Specifications and Documentation
- How to Select a Titanium Grade 2 Supplier in India
- Frequently Asked Questions
- Contact Manan Steel & Metals
1. What Is Titanium Grade 2?
Titanium Grade 2 is a commercially pure, unalloyed titanium grade used in applications where corrosion resistance, relatively low density and suitable mechanical properties are important.
It is considered for selected chemical-processing equipment, industrial components and other applications exposed to demanding environments. The correct material choice depends on the operating conditions, design requirements and applicable product specification.
Titanium Grade 2 is commonly identified by the following designations:
- Material: Titanium Grade 2
- UNS designation: R50400
- Material number: 3.7035, commonly associated with Grade 2
- Material category: Commercially pure, unalloyed titanium
When searching for a Titanium Grade 2 supplier in India, industrial buyers should confirm the exact grade, product form, dimensions and material documentation before placing an order.
For a technical overview, see the Titanium Grade 2 material datasheet.
2. Titanium Grade 2 Material Identification
Correct material identification helps prevent confusion between commercially pure titanium and titanium alloys such as Grade 5.
| Material detail | Titanium Grade 2 |
|---|---|
| Common name | Titanium Grade 2 |
| UNS number | R50400 |
| Material type | Commercially pure titanium |
| Alloy classification | Unalloyed titanium |
| Typical material number | 3.7035 |
| Common purchasing requirement | Product form, dimensions, applicable standard and supplied condition |
Titanium Grade 2 and Titanium Grade 5 are not interchangeable designations. Grade 5 is a titanium-aluminium-vanadium alloy, while Grade 2 is commercially pure titanium.
Always specify UNS R50400 where applicable and confirm the governing product standard to reduce the risk of ordering the wrong material.
3. Key Properties of Titanium Grade 2
Corrosion resistance
Titanium Grade 2 is valued for its corrosion resistance in many environments. It is considered for selected chemical-processing applications where corrosion performance is important.
However, corrosion behaviour depends on the chemical composition of the environment, temperature, concentration, flow conditions and other service factors. Compatibility should be confirmed for the actual application.
Low density
Titanium has a lower density than many conventional engineering metals, including steel. This can be beneficial where component weight is an important design consideration.
Mechanical performance
Titanium Grade 2 offers a useful combination of strength, ductility and formability for many industrial applications. Actual mechanical properties depend on the product form, condition and applicable specification.
Fabrication and forming
Grade 2 can be formed and fabricated using suitable procedures. Machining, welding and forming methods should be selected with consideration for titanium’s material characteristics and the required finished component.
Suitability for industrial environments
The combination of corrosion resistance and relatively low density makes Titanium Grade 2 relevant to selected industrial applications. Its suitability must be evaluated against the service conditions and design requirements rather than assumed for every environment.
4. Industrial Applications of Titanium Grade 2
Chemical processing
Titanium Grade 2 may be considered for selected chemical-processing equipment, fabricated components and parts exposed to compatible corrosive media.
Before selecting it, engineers should review the exact chemicals, concentration, temperature, pressure and exposure conditions.
Marine and chloride-containing environments
Titanium Grade 2 is considered for certain marine and chloride-containing applications because of its corrosion resistance. Actual suitability depends on the exposure conditions, component design and service requirements.
Industrial fabrication
Fabricators may use commercially pure titanium for selected components where corrosion resistance, material weight and forming characteristics are important.
Heat exchangers and process equipment
Titanium is used in selected heat-transfer and process-equipment applications. The appropriate grade and product form depend on the operating environment, design and applicable specification.
Specialised engineering components
Manufacturers may select Titanium Grade 2 for engineered components produced from bar, plate, sheet, tube or other forms, provided the material meets the required mechanical and corrosion-performance criteria.
These are potential application areas, not a guarantee that Grade 2 is suitable for every component in those industries. Confirm the material choice with the relevant engineering requirements.
5. Titanium Grade 2 Product Forms
The required product form depends on the component design and manufacturing process.
| Product form | Information to provide when enquiring |
|---|---|
| Titanium Grade 2 Round Bar | Diameter, length, quantity, condition and specification |
| Titanium Grade 2 Plate | Thickness, width, length, quantity and specification |
| Titanium Grade 2 Sheet | Thickness, dimensions, finish and quantity |
| Titanium Grade 2 Pipe | Outside diameter, wall thickness, length and applicable standard |
| Titanium Grade 2 Tube | Outside diameter, wall thickness, length and dimensional requirements |
| Specialised Components | Drawing, dimensions, tolerances and inspection requirements |
Product forms and dimensions should be confirmed with the supplier. Do not assume that every size or form is available at all times.
When requesting a quotation, specify the exact dimensions and quantity to help the supplier assess your requirement.
6. Important Specifications and Documentation
The correct material specification depends on the product form and intended use.
Common specifications to investigate include:
- ASTM B348/B348M: Titanium and titanium alloy bars and billets, including Grade 2 / UNS R50400 within its scope.
- ASTM B265: Titanium and titanium alloy strip, sheet and plate.
- ASTM B861: Titanium and titanium alloy seamless pipe.
- ASTM B862: Titanium and titanium alloy welded pipe.
- ASTM B338: Titanium and titanium alloy tubes for specified heat-exchanger and condenser applications.
These standards cover different product forms and requirements. Confirm the current applicable edition and exact scope before specifying a material in a purchase order.
Useful references include the ASTM B348/B348M standard page and the ASTM International standards catalogue.
Depending on the project, buyers may also need to confirm:
- Material designation and grade
- Applicable specification and edition
- Chemical analysis
- Mechanical test results
- Heat or lot traceability
- Dimensions and tolerances
- Material test certificate requirements
- Additional inspection or testing specified by the customer
A grade designation alone does not prove that a supplied product complies with every specification. Documentation must be checked against the purchase order.
7. How to Select a Titanium Grade 2 Supplier in India
Selecting the correct material supplier involves both technical and commercial checks.
Confirm the grade. State Titanium Grade 2 / UNS R50400 clearly in your enquiry.
Specify the product form. Indicate whether you require round bar, plate, sheet, pipe, tube or another form.
Provide exact dimensions. Include diameter, thickness, length, quantity and required tolerances.
Identify the standard. State the applicable ASTM or other required material specification.
Confirm documentation. Mention material test certificates, traceability and any additional inspection requirements.
Review the quotation. Check the unit of sale, quantity, taxes, packing, freight, payment terms and delivery schedule.
Verify availability. Ask the supplier to confirm the required dimensions, product form, documentation and lead time before committing to the purchase.
Manan Steel & Metals supplies industrial metal products and specialty alloy materials. Buyers can contact the company to discuss their Titanium Grade 2 requirement and request a quotation, subject to confirmation of product availability, specifications and commercial terms.
8. Frequently Asked Questions
What is the UNS number for Titanium Grade 2?
Titanium Grade 2 is identified by UNS R50400.
Is Titanium Grade 2 commercially pure titanium?
Yes. Grade 2 is a commercially pure, unalloyed titanium grade.
What is the difference between Titanium Grade 2 and Grade 5?
Grade 2 is commercially pure titanium. Grade 5 is a titanium alloy containing aluminium and vanadium. Their properties and intended applications differ, so they should not be substituted without engineering approval.
Which ASTM standard applies to Titanium Grade 2 round bar?
ASTM B348/B348M covers specified titanium and titanium alloy bars and billets, including Grade 2 / UNS R50400. Confirm the current edition and the exact product requirements before ordering.
Is Titanium Grade 2 corrosion-resistant?
It offers corrosion resistance in many environments, but performance depends on the actual chemical exposure and service conditions. Compatibility should be checked for the intended application.
What details are required for a Titanium Grade 2 quotation?
Provide the grade, UNS number, product form, dimensions, quantity, applicable standard, documentation requirements and delivery location.
Where can I enquire about Titanium Grade 2 in India?
Contact Manan Steel & Metals with your technical specifications and quantity to discuss your requirement and request a quotation.
9. Contact Manan Steel & Metals
Looking for Titanium Grade 2 for an industrial project?
Send your material requirements to Manan Steel & Metals to discuss the required product form, dimensions and specifications and request a quotation.
Manan Steel & Metals
Address: Shop No. 2, Hira Building, 97 Khetwadi Main Road, Girgaon, Mumbai – 400004, Maharashtra, India
Phone: +91 79773 69869
Email: manansteel@gmail.com
Website: www.manansteel.com
For a faster quotation, include: Titanium Grade 2 / UNS R50400, product form, dimensions, quantity, applicable standard and documentation requirements.
Availability, delivery schedules, pricing and specification compliance must be confirmed for each order.
SEO Publishing Checklist
- Primary focus keyword: Titanium Grade 2 Supplier India
- SEO title: Titanium Grade 2 Supplier India – UNS R50400 Titanium
- URL slug:
titanium-grade-2-supplier-india - Meta description: Looking for a Titanium Grade 2 supplier in India? Explore UNS R50400 titanium, its properties, applications and purchasing requirements. Enquire with Manan Steel & Metals.
- Featured image filename:
titanium-grade-2-supplier-india-uns-r50400.jpg - Image alt text: Titanium Grade 2 UNS R50400 commercially pure titanium for industrial applications
- Add a genuine product image or relevant industrial application image.
- Keep the ASTM and technical datasheet references as clickable outbound links.
- Add internal links to the Titanium Grade 2 properties, applications, specifications and price articles once published.
- Link this article to the relevant existing Titanium Grade 2 product page if available.
- Check for overlap with any existing Titanium Grade 2 supplier or round-bar page before publishing; merge or differentiate content if the search intent is substantially the same.
- Confirm all internal URLs work.
- Use the focus keyword naturally in the title, introduction, meta description and relevant headings.
- Avoid unsupported stock, pricing, certification or delivery claims.
- Review Rank Math after publishing and address the actual recommendations. An SEO score above 80 is a target, not a guarantee.